NCL-118

EPOXY ADHESIVE

NCL-118 is a high performance two part epoxy adhesive.

  • Superior mechanical strength
  • Excellent bonding strength to wood, concrete, fiber glass, glass, ceramic, marble, metal, many plastics and other surfaces.
  • Thermal resistant
  • Extensively used in marine-timber and fiber boat manufacturing & maintenance.
  • Seal concrete cracks
  • Water resistance
  • New concept for maintenance for industrial & household application

Category:

TECHNICAL DATA

Part A                                                              Epoxy Binder (white colour)
Part B                                                              Hardener (amber colour)
Viscosity                                                         Paste
Mix Ratio A:B (By Volume)                              2 : 1
Pot Life (TECAM) 250gm @ 20ºC                   30 minutes
Cure Time @ 20 – 25ºC                                   24 hours
Specific Gravity                                              1.1 – 1.2 g/cm³

PHYSICAL PROPERTIES

TENSILE SHEAR STRENGTH (DIN 53283)

Material                        Hardening                                Test Temperature                    N/mm²
Steel                           4 hours                                              20ºC                            12
Steel                            8 hours                                              20ºC                            26
Steel                             24 hours                                            20ºC                            32

PEEL STRENGTH (DIN 53282)

Material                        Hardening                    Test Temperature                    N/mm²

Steel, Pickled                  24 hours                               20ºC                            6-10

SURFACE PREPARATION

All surfaces should be dried, cleaned and free from all contaminants.

APPLICATION GUIDELINES

Mix thoroughly until even colour is achieved

Tools: Brush, Roller & Cartridge Dispensing System are suitable

NOTE: DO NOT mix more than 500 gm at a time as the pot life will be shortened, caused by generation of exothermal.

To speed up the curing time, heat up the assembly after application.

PACKING

Metal Can: 500gm, 1 kg and 6.3 kg

STORAGE

6 months when stored in a well-sealed container.

HEALTH & SAFETY

NCL-118 contains epoxy resins. Wash hands thoroughly with soap and water after use. Keep away from children. Harmful if taken internally.

Note:         Information in this data sheet is,   to the   best of   our   knowledge.   However, we have no control over the method of application and the amount of care taken   when   using   this product and therefore, the liability of NCL Chemical & Equipment is limited to the quality of the delivered material.