NCL PU100

High Built Elastic, Polyurethane Polymeric Coating

NCL-PU100 – Water Based Polyurethane Polymeric Coating base on co-poly condensate product for waterproofing, damp-proofing for concrete structure and cement surface. It has good adhesion to existing/old asphalt and PU coating. Easy application with roller or brush with smooth creamy finish. Application with fibre mesh would increase coating tear strength and abrasion resistance.

AREA OF APPLICATION

The high flexibility, excellent adhesion and water impermeability of NCL-PU100 is ideally suitable for :-

  • Roof Terrace
  • Planter Box
  • Kitchen
  • Bathroom
  • Basement
  • Courtyard Garden

ADVANTAGES

  • One Component
  • Seamless Membrane
  • High Flexibility
  • Excellent Adhesion
  • Easily repaired by spot application
  • Easily applied by brush, trowel/squeegee

TECHNICAL DATANCL PU100

Appearance: Dark Brown (wet), Black (dried)
Density: 1.35 kg/litre
Elongation: > 1000%
Coverage: 1mm/m²/litre(13 – 15m²/20kg)
Dry Film: Non-tacky (dry)
Drying Time: 60 minutes – 30°C
Primer: Dilute with 5% – 10% water. Epoxy primer may increase adhesion

APPLICATION & HANDLING

  • NCL-PU100 can be applied by brush, trowel, squeegee or airless spray. Two coat application but this will vary according to the site conditions and specification.
  • All surfaces to be coated should be cleaned, sound and free from foreign materials. The cleaned surface shall be primed with primer and allow to dry.
  • Newly placed concrete should be steel trowelled followed by light stroking with a hair broom to remove high spots before curing takes place. Any laitance on the cured concrete should be removed by water jet blasting or grit blasting.
  • Moss and lichen must be removed physically after which the surface should be treated.
  • All concrete plinths shall be joint up with a skirting and flushing when necessary. The skirting shall be a minimum of 150mm.
  • Provide the necessary joints to the R.C. structures and ensure that all defects must be rectified.
  • Tools and equipment should be cleaned with water immediately after use.

PACKING

20 KG /Pail

STORAGE

The shelf life of   NCL-PU100 is 6 months in original unopened containers if stored in a cool dry place.

HEALTH & SAFETY

Keep container tightly sealed and away from heat, spark or open flame. Clean hands and tools with kerosene or solvent when dry. Operators are advised to wear protective clothing and gloves during application. If in contact with eyes, wash thoroughly with copious amount of fresh clean water. If discomfort, please seek for medical advice.