NCL LG100-P SYSTEM is a formulated polyol blend, with all the necessary additives and is used in combination with the
Isocyanate . This system is used in the production of rigid polyurethane foam as insulation for domestic, commercial refrigerators
and sandwich panels. Blowing agent used is HCFC 141B and is pre-blended into the system.

It is recommended to keep container tightly closed in a dry, cool (20 – 25°C) and well-ventilated place. Material is slightly
hygroscopic, avoid ingress of moisture by keeping containers properly sealed when not in use. If the above terms and conditions
applied, the product has a shelf life of six (6) months.
Incineration or waste disposal should be in accordance with all applicable local and national regulations. Kindly check with your
local authorities on proper disposal method.
• Ingestion: Do not induce vomiting. Treat symptomatically and get medical attention immediately.
• Inhalation: Remove from exposure, if there is any difficulty in breathing, medical attention is required.
• Skin contact: Preferably wash with cleanser that contain polyurethane glycol or plenty of water.
• Eye contact: Hold the eye open and immediately flood the eye with plenty of water for at least 15 minutes.
The information contained herein was obtained from sources, which we believe to be accurate and reliable. However, it is
provided without any warranty, expressed or implied, regarding its correctness. The information is solely for the customer’s
consideration, investigation and verification. The statements in this information sheet are based on our present technical
knowledge and experience. For this and other reasons, NCL Chemical & Equipment Sdn Bhd do not assume responsibility and
expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or
disposal of the material.
For detailed information on product safety handling and emergency procedures, kindly consult the Chemical Safety Data Sheet.